When you own a Sub-Zero refrigerator, the last thing you require is for it to unexpectedly stop cooling. Lack of proper upkeep is the most common reason, which is why Sub-Zero refrigerator coil cleaning is so crucial. Avoid a significant repair by following our guide to keeping your design clean and running strong.
Guide To Sub-Zero Refrigerator Coil Cleaning
Keeping your condenser coils clean is quick, easy, and makes certain to save you money down the roadway. Just follow these Sub Zero refrigerator upkeep steps to maximize effectiveness and minimize the possibility of a breakdown.
Why Are Clean Refrigerator Coils So Important?
Fridges count on a condenser to remove heat and offer cool air throughout the system. Unfortunately, it’s inescapable that dust and debris will develop on the condenser coils over time. The more dirt that gathers on the coils, the more difficult your refrigerator needs to work to keep cold.
If left uncontrolled, this can lead to a damaged fan motor, compressor, or other important components that require costly repairs. We advise that you perform a coil cleaning at least 1-2 times annually, or whenever you see the Sub-Zero Vacuum Condenser message. And if you’re a pet owner, consider doubling the frequency of your cleanings.
How To Clean Sub-Zero Coils
Before you start, ensure that you’re prepared for the task at hand. You’ll need an appliance brush, gloves, and a vacuum with a tube attachment. Likewise, beware not to flex any of the condenser fins while cleaning as this can damage the part.
Switch off the power to the system before starting your cleaning. When the refrigerator is safe to work on, follow these steps:
Step 1– Remove Refrigerator Grille
The primary step in your Sub-Zero refrigerator coil cleaning must be to access the condenser. For most models, this will be discovered behind the big grille near the top of the system.
Some designs have grilles that can be lifted directly and gotten rid of, while others need to be unscrewed. For these systems, open the refrigerator doors and loosen the grille from the bottom. Now you can tilt the top of the grille towards you, unhook the springs from the back, and raise it off to get rid of it.
Action 2– Clean Off Dust & Debris
Cleaning Sub-Zero refrigerator coils are fairly simple. Use your device brush to eliminate any dust, lint, or other particles sticking to the condenser.
As soon as all of the dust has actually been wiped, use your vacuum hose attachment to clear out the compartment. When the entire condenser area appears brand-new once again, you can proceed to the final step.
Step 3– Reinstall The Grille
Now you can begin to finish up by putting the refrigerator grille back into location. Slot the grille back into position, and ensure to reconnect the springs to the back if necessary. Replace the screws that were eliminated throughout Step 1 and you’re good to choose a trial run.
Power your refrigerator back up and let it run for at least a day before checking the temperature level. If it reaches the appropriate level, then congratulations– you’re now a Sub-Zero refrigerator coil cleaning professional!
Don’t forget to repeat the procedure following our suggested cleaning schedule. If you’re still experiencing cooling problems after cleaning, however, call the Sub-Zero refrigerator repair work Salomon at Sub Zero Appliance Repair right now.
Recent Comments